Sketcher ToggleDrivingConstraint/es

Description

The Sketcher ToggleDrivingConstraint tool either toggles the dimensional constraint creation tools between driving and reference mode, or toggles selected dimensional constraints between those modes.

Contrary to driving constraints, reference constraints do not constrain the sketch, their value depends on other constraints, they are driven. They can be useful to verify measurements. They can be used in expressions, but not in the sketch itself.

Se establecieron una restricción de distancia horizontal (50 mm), una restricción de distancia vertical (30 mm) y una restricción de ángulo (75°) para definir el perfil; se añadió una cota de referencia en el segmento de línea inclinada para conocer su longitud (31,0583 mm).

Usage

Toggle tools

1. Make sure no dimensional constraints have been selected.
2. There are several ways to invoke the tool:
   • Press the Toggle Driving/Reference Constraints button.
   • Select the Sketch → Constraints → Toggle Driving/Reference Constraints option from the menu.
   • Use the keyboard shortcut: K then X.
3. The mode of the dimensional constraint creation tools is toggled:
   • In driving mode their menu and toolbar icons are red, and they create driving constraints (default color red). The icon of this tool is then: .
   • In reference mode their menu and toolbar icons are blue, and they create reference constraints (default color blue). The icon of this tool is then: .

Toggle constraints

1. Select one or more dimensional constraints.
2. Invoke the tool as described above, or with one of the following additional options:
   • introduced in 1.0: Right-click in the 3D View and select the Toggle Driving/Reference Constraints option from the context menu.
   • Right-click in the Constraints section of the Sketcher Dialog and select the Toggle Driving/Reference option from the context menu.
3. The selected constraints are changed from driving to reference mode or vice versa. Their appearance changes accordingly.
4. The mode of the dimensional constraint creation tools is not changed.